 |
|
 |
|
 |
 |
 |
| C. S. M. C. Model 21 |
|
| Trade in your Used Guns toward a NEW Model 21 |
| *Full Photo Gallery
*Pricing
*Order Form
*Winchester Model 21 Repairs
|
|
Please take a moment to look
through our online catalogue
|
|
|
|
|
|
Model 21 Pricing as of JUNE 2008
| |
21-1 |
21-5 |
21-6 |
Grand American |
| Standard Gun Prices |
$ 15,000 |
$ 18,000 |
$ 21,500 |
$ 24,500 |
| 28 Gauge on Standard Frame |
$ 18,000 |
$ 20,000 |
$ 23,500 |
$ 26,500 |
| .410 on Standard Frame |
$ 18,500 |
$ 21,000 |
$ 24,500 |
$ 30,000 |
| 28 Gauge or .410 on Baby Frame |
$ 26,500 |
$ 29,500 |
$ 31,000 |
$ 34,000 |
| .22 Rimfire Double Rifle |
$ 26,500 |
$ 28,000 |
$ 30,000 |
$ 32,000 |
| Matched Pairs of Guns |
add 20 % |
add 20 % |
add 20 % |
add 20 % |
| Ventilated Rib |
$ 900 |
$ 900 |
$ - |
$ - |
| Case Hardened Receiver & Forend |
$ 750 |
$ 750 |
$ 750 |
$ 750 |
| Raised Side Panel Receiver |
$ 550 |
$ 550 |
$ 550 |
$ 550 |
| Extra Set of Barrels |
|
|
|
|
| Extra Set of 12,16, or 20 Gauge on Same Gun |
$ 3,250 |
$ 3,250 |
$ 3,250 |
$ 3,250 |
| Extra 28 Gauge Barrel on Standard Frame |
$ 4,500 |
$ 4,500 |
$ 4,500 |
$ 4,500 |
| Extra .410 Barrel on Standard Frame |
$ 4,500 |
$ 4,500 |
$ 4,500 |
$ 4,500 |
| American Walnut Upgrade |
|
|
|
|
| AA Fancy |
$ 750 |
$ - |
$ - |
$ - |
| AAA Fancy |
$ 900 |
$ 900 |
$ - |
$ - |
| Turkish Walnut Upgrade |
|
|
|
|
| A Fancy |
$ 900 |
$ - |
$ - |
$ - |
| AA Fancy |
$ 1,400 |
$ 1,400 |
$ - |
$ - |
| Exhibition Grade |
$ 2,000 |
$ 2,000 |
$ 1,700 |
$ - |
| "A" Style Carving Pattern |
$ 850 |
$ 850 |
$ - |
$ - |
| "B" Style Carving Pattern |
$ 1,350 |
$ 1,350 |
$ 1,350 |
$ - |
| Monte Carlo |
$ 500 |
$ 500 |
$ 500 |
$ 500 |
| Cheekpiece |
$ 650 |
$ 650 |
$ 650 |
$ 650 |
| Basic Extra Forend with Standard Checkering |
$ 2,000 |
$ 2,000 |
Quoted |
Quoted |
| Butt |
|
|
|
|
| Skeleton Butt Plate |
$ 900 |
$ 900 |
$ 900 |
$ 900 |
| Heel & Toe Plates |
$ 900 |
$ 900 |
$ 900 |
$ 900 |
| Leather Faced Pad |
$ 175 |
$ 175 |
$ 175 |
$ 175 |
| Leather Covered Pad Style 2 |
$ 650 |
$ 650 |
$ 650 |
$ 650 |
| Leather Covered Pad Style 3 |
$ 650 |
$ 650 |
$ 650 |
$ 650 |
| Custom Built for "Your Name" on Rib |
$ 500 |
$ 500 |
$ 500 |
$ - |
| Upto 3 Initials on Oval |
$ 325 |
$ 325 |
$ 325 |
$ - |
| Gold Line Work on Receiver |
$ 1,800 |
$ 1,800 |
$ 1,800 |
$ 1,800 |
| Custom Engraving |
Quoted |
Quoted |
Quoted |
Quoted |
| Single Gun & Single Barrel Cases |
|
|
|
|
| Canvas with Accessories |
$ 300 |
$ 300 |
$ 300 |
$ 300 |
| Best Quality Leather Case with Accessories |
$ 650 |
$ 650 |
$ 650 |
$ 650 |
| Best Quality Oak & Leather with Accessories |
$ 850 |
$ 850 |
$ 850 |
$ 850 |
|
|
|
Order Form
|
|
|
Winchester Model 21 Repairs
Galazan has purchased all of the manufacturing machinery, tooling, and parts for the Winchester Model 21 double barrel shotgun from the U. S. Repeating Arms Corporation, New Haven, CT. Contact us for factory original parts, barrels, stocks, etc. for this American Classic. Call us if your Model 21 is in need of repair. Galazan is the Factory Repair Center for Winchester Model 21's.
- Reblue receiver including trigger guard, forend, trigger plate, and all screws and pins — $650.00.
- Reblue barrels — $350.00. Polishing included. Removal of heavy pitting or rust to be billed at an hourly rate.
- The average cost to repair a single trigger malfunction is $550.00 and includes parts. WE DO NOT WARRANTY WORK ON RE-STOCKED GUNS.
- Gold Trigger — $70.00
- Replace Hinge Pin - $375.00. Locking Bolt — $225.00
- Spring and Plunger — $190.00
- Converting Auto and Non-Auto Safety — $90.00
- Repair worn ejectors — $600.00
- Convert Extractor to Ejector — $2,900.00
- Engine Turning/Jeweling Flats — $250.00
- Leather covered pads. Add approximately 1” to the length of pull.
Installed, including pad (See photos below)
Style 1 — $175.00 Styles 2 & 3 — $425.00
- Shorten stock and add recoil pad — approx. $275.00
- Refinish wood and re-cut standard or custom checkering on forend and butt stock — $550.00.
Each additional forend — $275.00.
‘A’ carved wood — $800.00 ‘B’ carved wood — $1,000.00
- Glass Bed — $400.00
- Re-stocking and new forend (AA fancy Wood) approx. $6,000.00 Re-stock only $4,000.00 (Up-grade to AAA fancy wood is an additional $1,000.00)
- Black Walnut stock and forend Blank — $850.00
- Forend Metal Only — $1,600.00
- Forend Wood Only — $1,200.00
- Forend Wood & Metal — $2,500.00
- Forend Latch repair — $200.00
- Strip and relay loose ribs and blue — $1,100.00
- Install new 12, 16, or 20 gauge barrel — $4,500.00
28 & .410 Barrels approx. — $5,500.00
- Open Chokes — $250.00 each
- Other work will be quoted, please write or call.
 |
| 1 |
2 |
3 |
|
|
|
|
|
© 2008 Connecticut Shotgun Mfg. Co. All Rights Reserved. Phone: (860) 225-6581. Email: galazan@msn.com
CSMC, P.O. Box 1692, New Britain, CT 06053, U.S.A. |
|
|
|
